Tourist car pictures Electric tourist car Mountain Sightseeing Vehicle Other sightseeing vehicles 23 tourist vehicles
QUANTUM Bucket Elevators have successfully been installed in a wide range of applications and capacities. From process equipment, handling a few kg /hr to over 2000 t/hr with a vast range of materials. Whether your application requires a heavy-duty high capacity machine or an industrial process elevator for your factory.
We have a wealth of experience in designing the correct bucket elevator for your application and have a standard range of elevators, which can be specifically designed for, more specialised applications.
Our elevators have conveyed high temperature, high wear, abrasive, large lumpy, sticky non-flowing materials, as well as free flowing powders and granules. We supply a standard range of twin chain and belt elevators single or twin bucket design for high capacity applications such as grain, minerals and ore. The selection of the elevator depends on the material characteristics and IBS will be able to advise you and select the elevator most suited to your material and your application.
For some materials and specific applications, Quantum will design in accordance with Australian standards, suitable explosion venting and will design the structure of the elevator to suit the required application. Typical material that requires this consideration would be sugar, flour, grain and coal.
Standard features for all our bucket elevators
• Qty2 1000mm long inspection doors in conveyor leg and return leg in twin leg elevators for easy inspection of belt or chain and replacement of buckets. Inspection hatch will be provided with bolted mesh screen and safety limit switch
• Belt tracking sensor or switch for belt Bucket Elevators
Coupled with our range of standard steel and plastic buckets, elevator chain and fittings, belt tracking switches and sensors we will keep your business moving--
Bucket Elevator,Bucket Conveyor,Elevator Conveyor,Vertical Conveying Elevator Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.quantum-sino.com
Sightseeing car introduction Tourist cars use batteries to generate power, environmental protection without pollution, and effective use of resources.
Sightseeing Vehicles There are a wide variety of sightseeing vehicles, which can be divided into tourist and sightseeing vehicles, mountain sightseeing vehicles, electric minibuses (city tours), and classic cars (VIP tour buses).
Tourist Sightseeing Vehicle name Amount of guests One-time charging mileage Maximum braking distance Minimum turning radius Maximum climbing grade (full load) Maximum speed km/h Body and outer bracket Seats Tourist Sightseeing Vehicle (V14) 14 people ≤120 km ≤5m ≤6.5m 26% 30/45 km/h FRP body, steel frame Bus seat or in-line soft seat (user optional) Tourist Sightseeing Vehicle (V8) 8 people ≤140 km ≤5m ≤5m 36% 30/45 km/h FRP body, steel frame Bus seat or in-line soft seat (user optional)
Mountain Sightseeing Vehicle name Amount of guests One-time charging mileage Maximum braking distance Minimum turning radius Maximum climbing grade (full load) Maximum speed km/h Body and outer bracket Seats Mountain Sightseeing Vehicle (V8) 8 people ≤140 km ≤5m ≤5m 36% 30/45 km/h FRP body, steel frame Bus seat or in-line soft seat (user optional) Mountain Sightseeing Vehicle (V11) 11 people ≤130 km ≤5m ≤5m 36% 30/45 km/h FRP body, steel frame Bus seat or in-line soft seat (user optional)
Other sightseeing vehicles name Amount of guests One-time charging mileage Maximum braking distance Minimum turning radius Maximum climbing grade (full load) Maximum speed km/h Body and outer bracket Seats sports car 5-people ≤140 km ≤5m ≤4.5m 45% 45 km/h FRP body, steel frame Car seat classic cars 8 people ≤120 km ≤5m ≤6.5m 36% 45 km/h FRP body, steel frame Inline soft seat (user optional) Electric small bus 14 people ≤120 km ≤5m ≤6.5m 26% 30/45 km/h FRP body, steel frame Bus seat or in-line soft seat (user optional)
How to choose tourist car style selection There are three kinds of driving methods for electric vehicles: one is a hub-type drive, one is a mid-range drive, and the other is a suspension-type drive. In the market, electric vehicles are mainly driven by wheels, while wheels are driven by rear wheels and front wheels are relatively poor. Functional style selection Generally divided into standard, multi-functional and luxury. Specification selection Electric vehicles are generally more than 610mm, and current production companies have also designed and manufactured 660mm or 560mm electric vehicles to meet the needs of consumers at different levels. Brand choice The brand is a sign of quality. Different brands have different levels of quality. Consumers must choose brands that have been tested by authoritative departments and have been proven to have reliable quality, low repair rate, good after-sales service, and high reputation. Consumers can pay attention to the “reputation mark†issued by China Bicycle Association on electric vehicles.
Sightseeing car maintenance Daquan 1, should open all battery caps when charging, keep indoor ventilation, no open flame, to prevent explosion! (Hydrogen is generated during charging). 2. Check the liquid level in the battery before each charge, and keep it 5 to 10 mm above the grid plate. 3, battery level is insufficient should be added to the battery dedicated distilled water (recommended to use more than 20 liters of plastic bottles in accordance with the national standard with distilled water, if added to tap water or small bottles of liquid supplements and other differences grid cell will cause damage to the battery!). 4. Use clean plastic cups or porcelain cups and other non-metallic vessels when adding water. Prevent impurities from entering the battery. If any impurities fall into the battery, do not use metal materials such as wire and copper wire for fishing. Use clean wooden rods to trap impurities. 5, tourist car should be filled with every charge, to avoid stop filling halfway (occasionally stopped filling the battery has little effect). 6. Each time the tourist vehicle is used (more than 15 kilometers), it must be recharged on the same day. 7. Avoid loss of electricity and store electricity. Before you leave it unused, you must fully charge it. Charge it every 15~20 days during storage.
• Gravity elevators
• Positive discharge elevators
• Central discharge slow speed elevators
• Centrifugal elevators
Gravity Type Bucket Elevator
Quantum supply gravity discharge elevators and positive discharge elevators, supplied as close bucket discharge type, central discharge type, or Idler wheel discharge.
Generally a slow speed design gravity bucket elevator is primarily installed for elevating large lumpy & abrasive material. Our standard units are usually chain driven, either friction drive or toothed sprocket.
These elevators offer reliability with minimum wear & a positive discharge emptying of the bucket.
Centrifugal Type Bucket Elevator
Quantum standard range of centrifugal elevators are the most common type of elevator installed to most industries supplied in both belt type or chain type depending on material characteristic and the capacity being elevated and in some case the feeding method of the elevator.
Conveying type
• Segmented tooth sprocket chain type, twin chain or single dropped forged link chain
• Friction chain type elevators, European rolled chain
• Belt elevator. Using rubber belt or 100% polyester solid woven belt, nylon and steel woven belt Typical Construction
• We supply Single leg or Double leg elevators
• Lagged head Pulley
• Slatted return pulley for sticky materials
• Segmented removable sprockets for chain elevators
• Segmented and removable friction pulleys for friction drive elevators
• Fabricated boot and head section assemblies
• Fabricated 3.0m long nominal casings c/w with self-supporting frame and lateral support frames
• Dust tight sealed flanges
• Screw or counterweight tail end take up
Whether the elevator is best suited for toothed sprocket design, friction wheel on conventional belt, IBS will be able to assist with correct selection for the most reliable, maintenance free and cost effective machine to suit your material characteristic and conveying capacity for your particular application.
Types of Buckets readily available
IBS Supply a range of standard off the shelf buckets in a variety of sizes and materials.
Selection of bucket type will depend on material, material characteristics and application. Typical IBS buckets would be plastic-nylon or polyurethane and can be provide FRAS, mild steel fabricated or pressed, stainless steel fabricated or pressed and wear tips for abrasive materials.
Safety and maintenance
• Our equipment is supplied mandatory with anti-roll back device in full load condition
• All inspection doors are fitted with safety limit
• Safety factor of minimum 12: 1 to rated chain pull to installed chain or belt pull under full load stall conditions
• Fully removable split head top section.
• Clean out and inspection doors in Boot section. Self-cleaning boot section optional.
• Under speed sensor and flag disc
• All our equipment is designed to meet Australian Standards
• Selection of correct conveying velocity and material trajectory for centrifugal elevators is critical to the successful operation of a bucket elevator
• Standard wear plates on boot in-feed and head chute discharge.
• Designed to operate no more than 70% water level of selected bucket at normal operation.
• Installed power capable of full load start up under full bucket surge capacity.
• Our bucket elevators are designed for dust tight design, with suitable dust extraction points
• All our bucket elevators are designed to be self-supporting and are provided with lateral support bracing at approx. 10m centres
Replacement parts service
We can provide a range of standard bucket elevator parts using our standard head and tail pulley assemblies, conveyor belting, elevator butt straps, conveyor bolts and fittings, belt-splicing fittings.
Quantum can provide a customised service contract using experience technicians with many years` experience in servicing and troubleshooting bucket elevators in most states. This service ensures that your equipment is functional to its optimum capabilities and reduces down time parts replacement and potential damage.Our technicians have standard customer maintenance, checking and reporting procedure.
tour car
China Motors Sightseeing Car Columns are included in the China Ministry of Industry and Information Technology Tourist Cars Automobile Announcement All 2 Categories 3 Manufacturers 3 Sightseeing Vehicle Brands 7 Sightseeing Vehicles Product Information, Latest Sightseeing Vehicle Announcements, Environmental Notices, Fuel Bulletins, Exemptions Levy announcements, pictures, news, and the most timely information on the price of tourist car quotes. Has a personalized control system, steering flexibility, feel comfortable, light and smooth, driving simple, electric can be recycled, long life and other advantages. At present, tourist vehicles are widely used in hotels, scenic spots, salesrooms, RVs, factories, airports, railway stations, bus stations, docks, stadiums, parks and other places. Most sightseeing vehicles adopt a battery-powered driving method and do not emit harmful gases that pollute the atmosphere. They can be used only by charging the batteries. Most of the power plants are built far away from densely populated cities, causing less harm to humans and the power plant is stationary. It is relatively easy to concentrate emissions and eliminate various harmful emissions, and relevant technologies have already been established. Tourist car battery power and energy to get way, such as coal, nuclear energy, hydraulic and so on. Sightseeing vehicles can make full use of the surplus electric power when electricity is used in the evening to make full use of power generation equipment day and night, greatly improving its economic benefits, and contributing to saving energy and reducing carbon dioxide emissions. The disadvantage of sightseeing vehicles is that the climbing ability is weak. 8. The surface of the battery should be kept clean and dry, and the connecting wires should be firmly in contact (the contacts should be rust-free and smear Vaseline). They should be checked every week. 9. If there is an abnormality in the battery (the mileage is obviously decreased, and the self-discharge is not obvious when placed), the detection process should be carried out in time. 10. When a liquid in a battery of a sightseeing vehicle appears turbid or the liquid level drops significantly, it shall be detected and dealt with immediately. 11, battery damage is usually only first appeared in 1 to 2, then if not handled in time, it will encounter other batteries. 12, electronic control, fuse boxes and other electrical components should not use water rinse! You can use a brush or high-pressure gas dust. 13. Charger sequence: The charger is connected to the vehicle body → Connect 220V power supply → Turn on the charger switch (anti-manipulation after full coverage) 14, the power cord connecting the charger should reach more than 3 square (recommended to use waterproof cable directly from the distribution box leads), the power socket connecting the charger should reach 16A (16A) (such as qualified cabinet air conditioner socket). The power socket should be connected separately and cannot be inserted into other electrical appliances. The connection between the charger and the battery must not be arbitrarily lengthened. 16. If someone starts to charge within 1 hour, if there is heat and softening, the wire is in a disagreement and please stop charging. Energy-saving electric vehicle 17. Non-professional staff should not repair the electrical part by themselves, do not disassemble the battery on their own (Disassemble the negative pole and then remove the positive pole when removing the battery from the vehicle; install the battery should first install the positive pole and then install the negative pole; the cable joint must not be touched after being removed Bodywork, etc. so as not to explode) 18. It is normal for the sightseeing car to reduce its mileage in winter; if it is not stored in full in winter, it will cause the battery to crack.