Cooling tower filler are vacuum-formed and glued together in a way that provides adequate space to avoid scaling and clogging. Thus, the water can be evenly distributed to insure high heat exchange efficiency. Each layer of filling blocks has steel supporters to prevent from deforming and falling off. The bottom is designed with suspended supporters to avoid depositing various objects and scaling so that cooling towers can be at ease of maintenance and cleaning. PVC fillings are suitable for operation with inlet water temperature up to 47°C. C.P.V.C. or P.P fillings can be used as an option for situations with higher water temperature.
Cooling Tower Fill,Pvc Cooling Tower Fill,Cooling Tower Filler,Cooling Tower Filling Hebei Long Zhuo Trade Co., Ltd. , https://www.hblongzhuo.com
Disassembly method and procedure of dispensing pump
1, detachable parts are not disassembled as far as possible without demolition. 2, the distribution pump in operation, use a small oil tray to take out the flow of diesel. 3, remove the pump rotor, rotor must be distributed along the direction of rotation to be removed, use a special wrench when demolished. 4, the distribution of small screws in the middle of the right rotor pump center is the process hole stuffy stuffy hole, generally do not split. 5, the timing ring do not remove the cam ring, because it is by its own elastic fixed in the shell, the factory positioning has been calibrated, after the demolition difficult to calibrate. 6, split spline sets and before and after the control panel, it should be noted that its original assembly location, so complex. Only adjust the maximum fuel supply before allowing a slight rotation around the control panel. 7, pressure regulator valve assembly if there is no failure do not disassemble, if you must disassemble, you should pay attention to the regulator valve spring do not lose, according to the original position back. 8, in the dismantling triangle dish, you should hit a mark at the junction, so that when installed according to mark complex.