For the usage, function and characteristics of the magnetic separator, we believe that the users of the magnetic separator know that the measurement of the magnetic strength of the magnetic separator may not be clear, so today the experts of the Sai Teng magnetic electromagnetic machine will measure The magnetic strength of the magnetic separator is introduced to everyone. Generally, when measuring the magnetic field strength of the magnetic separator, the Gauss meter is used for measurement. The Gauss meter has high measurement accuracy and wide application range. Before using the Gauss meter to measure, the cylinder (and the magnetic system) are first supported, and the height is convenient. The measurement is suitable. At this time, magnetic lines vertically downwards, but can not see the pole, fixed measuring point allowed, iron powder can be sprinkle in the outer cylinder, the edge of the pole to attract more iron in the outer cylinder, the shape of the magnetic poles can be displayed. If there is no iron powder, you can also use iron nails to find the point. The nail can stand upright on the cylinder surface, that is, the center of the magnetic pole (or the center of the pole gap). After finding the exact position, mark it with chalk or a brush and measure it point by point. Measurement methods: In order to make the position of the measuring point accurate, the measuring point sample (using plexiglass plate or wooden board) should be made according to the shape of the magnetic pole before the measurement. Draw the position of each measuring point on the sample board and drill holes at the measuring point position to prepare the probe for penetration into the hole for measurement. The measurement content generally includes: the magnetic field strength of each section of the magnetic system at different positions, the magnetic field strength of each key point on the surface of the magnetic pole to be measured on each section, and the magnetic field strength of a spatial point at a certain distance from the magnetic pole. Specific steps are as follows: (1) Select three sections along the axial direction of the cylinder: one of them is selected in the middle, and the other two sections are taken at 200 mm from both ends. (2) The magnetic field strength of several key points on the surface of the cylinder should be measured on each section. Generally, there are 3 points in the edge and the middle of each pole (2 points of the magnetic system edge), and 1 point in the middle of the pole gap. When the number of poles is n, the number of points is N=[3n-2+(n-1)]=4n-3. For example, the 3-pole magnetic system is 9 points, and the 4-pole magnetic system is 13 points. (3) The average value of the magnetic field strength at each point measured on the surface of the cylinder represents the magnetic field strength of the cylinder surface. Similarly, the average value of the magnetic field strength at each point from a certain height of the cylinder surface represents the magnetic field strength of the curved surface. (4) Measure 3 to 5 points from the cylinder surface at each key point on each section. Such as 10mm, 20mm, 30mm, 40mm, 50mm from the cylinder surface. Determining the magnetic field strength of the magnetic separator is the key to selecting which type of magnetic separator for mineral selection. It plays an important role in the upgrading of the concentrate quality of the slurry material. Therefore, it is not admissible to choose the most suitable magnetic separator for material sorting. . 1.High Precision HSK shank Tool Holder ,balanced G6.3/15000RPM or G2.5/25000RPM For choose,With DIN6499 collet chuck can be straight shank cutter clamping various sizes Hsk Tool Holders,Hsk 100 Tool Holders,Sdc Collet Chuck For Pull-Type,High Speed Hsk Milling Chuck Shandong Chongde Precision Machinery Co.,LTD , https://www.springcollet.com
2.HSK Tool Holders Manufactured from alloy steel with good core strength and long wear life.
Taper shank is case hardened to 58-62 HRC
3.Taper ground to AT3 or better accuracy standard for maximum contact with spindle.All Collet Chuck critical surface are precision ground.
4.HSK Tool Holders for mechanical spindle and cutting tool and other accessory tool connection. Is a simple, popular spindle shank connection standard, mainly NT30 NT40 NT50... Etc.. Mold industry, and high-speed engraving machine, used more.
At present the main traditional CNC Machine tool accessories standard HSK Tool Holder
5. We can to figure to sample processing ,and perfect after-sales service and technical support.