Technology is more and more developed and automotive technology is more and more advanced. Most models now have a keyless start system, and the keyless start system brings convenience and hassle. What happens if the owner suddenly forgets to turn off the fire when the driver gets off the bus? What happens? In fact, the answer is simple. If you forget to turn off the engine, it will cause the car to stay in an idle condition. Because the car does not judge itself, it is not possible to turn off the flame automatically and it will remain idle at all times. If you idle for a long time, it will cause carbon deposition in the car, and it will clog the fuel injectors. Sometimes, the oil will be diluted, deteriorated, and even polluted. The consequences still seem to have many disadvantages. If you forget to turn off the car will be stolen by others? Needless to say, it certainly is. The keyless starter system of the car, although it is convenient without using the car key, but as long as forget to turn off before getting off the car, the car has been in the starting state. Not only is the car in the starting state, the car door is not locked. In this case, anyone can enter the car directly to drive away. Seeing here is not a kind of feeling of scaredness. Car owners must pay more attention to driving afterwards. They should not be so-so. Xiao Bian thinks that the progress of science and technology can really bring us convenience, but now the rapid development of science and technology has given many criminals more opportunities, so they want to play more high-tech but also have to be more careful, otherwise the car into someone else It's too late to cry. You Xiaozhuo have any opinions on the keyless boot system, you can participate in the comments below the article.
Tensile Testing Machine, also known as universal material testing machine. The universal testing machine is a mechanical forcing machine used to test the mechanical properties of various equipment such as static load, tension, compression, bending, shearing, tearing, and peeling for various materials. It is applicable to plastic plates and pipes. Various physical and mechanical performance tests for materials such as profile, plastic film and rubber, wire and cable, steel, glass fiber, etc. are material development, and are indispensable testing equipments for physical property test, teaching research, quality control, etc., and tensile machine jigs are used as instruments. The important part is that different materials require different fixtures, which is also an important factor in the success of the test and the accuracy of the test results.
Test object
main feature
Widely used in metrological quality inspection; rubber plastics; metallurgical iron and steel; machinery manufacturing;electronics and electrical appliances; automobile production; textile chemical fiber; wire and cable; packaging materials and food; instrumentation; medical equipment; civil nuclear energy; civil aviation; colleges and universities; Laboratory; Commodity inspection and arbitration, technical supervision department; building materials ceramics; petrochemical industry; other industries. Tensile Testing Machine Tensile Testing Machine,Vacuum Chamber,Pressure Chamber,Universal Tensile Testing Machine Dongguan Jaten Instrument Co.,LTD(HK TT:Jaten Technology Co.,Ltd ​) , https://www.jatentech.com
Servo tension machine is mainly used for the testing of metal and non-metal materials, such as rubber, plastics, wire and cable, fiber optic cable, safety belts, belts, leather belt composites, plastic profiles, waterproof coils, steel pipes, copper, profiles, Spring steel, bearing steel, stainless steel (and other high hardness steel), castings, steel plates, steel strips, non-ferrous metal wire stretching, compression, bending, shearing, peeling, tearing, two-point extension (need to extend the extension ) and other tests.
Tensile testing machine FR-103G Rally machine
The use of imported optical encoders for displacement measurement, the controller uses an embedded single-chip microcomputer structure, built-in powerful monitoring and control software, set measurement, control, calculation, storage functions in one. With automatic calculation of stress, elongation (extended with extensometer), tensile strength, elastic modulus function, automatic statistical results; automatically record the maximum point, break point, the specified point of the force value or elongation; using a computer to test The dynamic display of the process and test curve, and data processing, after the end of the test can be through the graphics processing module for data analysis and editing of the curve, and can print the report, the product performance has reached the international advanced level.