Greening vehicles are an indispensable type of special vehicle in the urban landscape greening field. According to its shape and performance, the greening vehicle is divided into a pointed greening sprayer , a flat greening sprayer, a single-bridge greening sprayer, and a double-bridge greening sprayer. Today, we will separately introduce the structural features of the pointed green spray trucks commonly found on the road surface. The most popular tipped greening sprayer in the market is the type of sprayer produced and produced by a large-scale special-purpose vehicle company. The type of fuel for this vehicle is diesel-based. Of course, with the improvement of vehicle-building technology, there are also some sprayers that are entering the field of high-efficiency. However, what we are talking about today is focused on diesel-fuelled pointed green spray vehicles that are currently on the market. Knowing the structural features of the pointed greening sprayer , the basic configuration of this type of spraying vehicle has to be understood. When the vehicle was designed and manufactured, different modes of spray water pipes were installed in front of the car, behind the car, and on the side. Even the rear end of the vehicle was specially designed with a unique working platform and equipped with a sprinkler anti-aircraft gun. In particular, the nozzle of the vehicle's predecessor is located below the front end of the cab of the sprayer. The two unique spray equipments are mapped to each other and are not located high above the ground. Therefore, when the spraying work is performed, the spray pressure can be used to flush the spray. Road pavement or landscaping area. The position of the shower head located behind the vehicle body is much higher than the height of the sprinkler head at the front of the vehicle body, and the area of ​​the sprinkler is also large, which can be applied to the main street road cleaning in the city. However, when the driver uses the nozzle behind the vehicle body, it cannot be used together with the nozzle in the front stage. The nozzle at the front end should be completely closed so that the nozzle behind the vehicle body can be used safely. The sprinkling water cannon equipped on the rear table of the pointed green sprayer is different from the front and rear water sprinklers. Its uniqueness lies in the fact that the staff can adjust the nozzle height and spraying method according to the actual spraying requirements of the greening land, and can meet the requirements of greening and spraying in different places. Therefore, the pointed greening sprayer has been sanitation management personnel in the current urban sanitation field. Respected.
Describle:
PP plastic filters is developed and designed for chemical industry. It is an excellent economic and practical anticorrosive filter which is widely used in solid-liquid separation of corrosive materials of acid and alkali. The whole plastic cylinder and its accessories are made of pvdf, pph, ppr and other anticorrosive plastic materials to realize the contact between non-metal parts and materials, which can be competent for high temperature, high concentration hydrochloric acid, sulfuric acid, etc. aqua regia and other strong acid strong base liquid filtration and most of the chemical liquid filtration. The filters are fast open, easy to maintain, easy to disassemble. The bottom of the cylinder is designed with a clever slope, no residual fluid after filtration. The integral molding injection molding process makes the cylinder without any soldering interface and solder joint, and the inner surface is smooth without dead angle. The plastic anticorrosive filter is widely used in chemical industry.
1.The Filter Material inlet adopts the jacking tortoise shell design, the liquid flow is more unobstructed and the liquid accumulation.
2. Top cover adopts the quick opening way, the maintenance is convenient and easy to disassemble, and it is equipped with 6 sus316 flange bolt rings to protect the pressure.
3. The bottom of the sealing filter adopts slope design, no residual liquid after filtering, to avoid material waste .
4. The barrel body ,basket, and the filter bag ring is made of high temperature modified polypropylene (ppr/pph) or pvdf anticorrosive material.
5. The cylinder body has no welding interface and weld, and the smooth and beautiful.
6. The sealing ring is made of fluorine rubber material. Excellent corrosion resistance.
7. The flange bolt hole spacing of inlet and outlet has multi-functions, which can be matched with national standard, American standard, day standard, German standard flange.
8. The mounting square base to enhance the safety and stability of the filter, easy to be fixed in different demand situations .
Pp Filters,Pp Plastic Filters,Pp Plastic Air Filter,Pp Plastic Blank Filter Henan Sinofiltec Technology Co.,Ltd , https://www.airfilters.pl
