Marine Ship Mounted Panama Chock AC

/ November 30, 2022

Model NO.: WT0701304
Certificate: CCS,Gl,Dnv,BV,ABS,Rina,Kr,RS etc
Usage: Steel Rope, Mooring Rope
Technology: Casting
Trademark: WEITONG MARINE/OEM
Transport Package: Wooden Case or as Required
Specification: As per request
Origin: China
HS Code: 73269090
Marine Ship Mounted Panama Chock AC
Panama Chock AC is a popular type of marine Chocks, made from cast steel material, seat and bulwark are made by processing steel sheet. We can manufactures chocks in a wide variety of sizes and styles,also can customized the chock according to your drawing.
1.Material:cast steel ZG200-400,ZG230-450.
2.Paint:Normally we adopt Grey Epoxy Primer or Black Bitumen Paint.
3.Packing:Iron shelf or as per your request.
4.surface in contact with the rope in use been finished smoothly.
Panama Chock AC Certificate: ABS,GL,RINA,DNV, mill certificate available, etc. 
Panama Chock AC Specification
JIS F2017-1982 AC type Deck mounted Panama chock
Model Dimensions(mm) Mass(kgs)
  A B C D E
PAC-001 310 708 639 541 652 253
PAC-002 360 760 640 542 704 289
PAC-003 400 804 642 545 750 323
PAC-004 450 856 643 547 802 351
PAC-005 500 908 644 549 854 395

Weitong Marine provide Kinds of Marine Chocks as following: 

1.(DIN81915) Type Din Chocks, 
2.Type U.S.Panama Chock, 
3.JIS F2005-1975 Closed Chocks, 
4.JISF 2007-1976 Mooring Chock(A), 
5.JISF2017-1982 Panama Chock(AC),JISF2017-1982 Panama Chock(BC) 
6.JISF2030-1978 Single Point Mooring Pipes(A),JISF2030-1978 Single Point Mooring Pipes(B) 

Quality Assurance and Service
1. Have a complete rigorous management, production and inspection processes to control the quality and avoid detail mistake
2. Design and produce ability
3. Rigorous inspection including incoming inspection, flaw detection etc., and double check is a must.
4. Advanced factory facility ensure
5. Response to any inquiry within 24 HRS with design or efficient solution from our engineer or tech supporter.
6. Provide professional customization service according to client's requirements
7. on time delivery, as we have rigorous production schedule and profession follow-up process
8. Moderate price and professional service

If you have any question or inquiry, please feel free to contact us for more details.
Ms Kate
Tel: +86-756-8169003
Phone: +86-13923317268
Website: www.weitongmarine.com
Other Products Photos





















 

Closed Cycle Spray Dryer

Closed-circuit Centrifugal Spray Dryer is a system composed of a closed circulation loop, and the heat carrier can be recycled. For the drying of volatile materials that are organic chemical solvents, toxic or can cause harm to people and the environment after escaping, the organic solvents or products contained in the material liquid are easily oxidizable, flammable and explosive materials. Under normal circumstances, the materials that need to be used in this process cannot contact oxygen, so most of the heat carriers use inert gases (such as nitrogen, carbon dioxide, etc.); this method is also called inert gas drying. The exhaust gas discharged from the Dryer, after gas-solid separation, also passes through the condenser to recover the solvent or remove the moisture, and then enters the dryer for recycling after being heated up by the heater. Through the heating medium and closed circulation method, we can effectively avoid the danger of high temperature in the drying of materials, prevent contact with oxygen during the Spray Drying Process, and recover more than 90% of the dust.

Closed Cycle Spray Dryer,Closed Loop Spray Dryer,Loop Spray Dryer,Mesin Spray Dryer

Griffin Technology Manufacturing Co., Ltd. , https://www.griffindryingeqpt.com

You may also like