A Barge is a flat-bottomed boat, built mainly for river and canal transport of heavy goods. Some barges are not self-propelled and need to be towed or pushed by towboats. Canal barges, towed by draft animals on an adjacent towpath, contended with the railway in the early Industrial Revolution, but were outcompeted in the carriage of high-value items due to the higher speed, falling costs and route flexibility of railways.
Photo of our Barge:
Type of the barge
Barge Split Hopper Barge,Sand Barge,Pontoon Barge,Self Propelled Barge Unisite Group Ltd. , https://www.shipsparts.nl
 
                                                   Manufacturer site of slitting line machine
                                                Whole Production Line of Slitting Line Machine
Application
The slitting line machine/ steel coil slitting cutting production line/ slitter and rewinder is suitable for the longitudinal shearing work of the metal belt material, and rewinding the narrow strip into the new roll.
The slitting machine is applied to the thickness of material from 0.2mm to 30mm, width from 300mm to 2100mm. The popular slitter rewinder machine is also applicable for cold rolled steel, tinplate, hot rolled carbon steel coil, silicon steel coil, stainless steel coil and all kinds of surface coated metal plate.Â
Technological Process
-->Feeding car
-->One-armed Feeding Machine
-->Leading end, Pressing end, shovel end, two rollers feeding
-->End head cutting
-->Loop I
-->Recifying device
-->Round cuttrt Slitting machine
-->Wasted strip recoiling machine
-->Loop II
-->Preassigned material device, Tensioner
-->Recoiling machine
-->Material discharging car
-->Hydraulic control
-->Electric controlÂ
Specification sheet
Thickness
width
Roll weight
Finished width
Shearing velocity  (MAX)
Floor space; L*W
0.15-2
800-1600
30T
≥20mm
200m/min
25*10
0.5-4
800-1600
30T
≥40mm
120m/min
25*10
1-6
800-1600
30T
≥60mm
80m/min
25*10
2-8
800-2000
30T
≥70mm
60m/min
30*11
3-10
800-2000
30T
≥80mm
50m/min
35*11
3-12
800-2000
30T
≥100mm
40m/min
35*11
3-14
800-2000
35T
≥100mm
40m/min
36*11
3-16
800-2000
35T
≥120mm
35m/min
36*11
5-20
800-2000
40T
≥120mm
30m/min
38*11
Related Products
A. Cut to Length Machine
B. Rolling Mill Machine
Company Introduction
Lixing Metallurgy Machinery Co., Ltd, professionally works on production of slitter such as disk metal slitter, cable material cutter and metal band cutter, plane shear series, cold rolled steel shaper serious and bending machine with three and four rollers.
Â
Company covers 18,500m2. It can produce more than 60 cutter sets in diversified types annually. At present there are over 100 employees including 35 technicians. Our equipments reach international advancement, which are achieved by experienced and professional boasts completed processing machines and strong competence concerning technology and processing ability. It has worked on production for over 30 years.
Â
Our equipment are more economic and practical compared with equivalent imported ones. In addition we can provide quick-response and high-efficiency after-sales service and trained technical around personnel. Our products are popular around China and won unanimous appraisals from customers.
!!Please contact us if you have any inquiry
Elisa
Â
Â
Â
 
There are many kinds of barge.
1. by use of points
The main passenger barge and cargo barge.
Passenger barge, special passenger transport, with living facilities, generally used for the river passenger.
Barge, used to carry goods, according to the goods can be divided into dry cargo barge, Sand Barge, barge, coal barges, Deck Barge. The general cargo barge without Lifting Equipment, loading and unloading of cargo handling machinery on the docks. Cargo can also be used for goods in transit port.
2. structure form
Open deck barge: aka open barge, with several hatch hatch barge; only one cargo holds, above all open;
The deck barge: no cargo on deck, cargo, deck is arranged around a pile of blocked goods coaming;
Deck barge deck stowage, deck cargo are arranged around the hatch coaming;
Tank barge: a container, such as a tank, is set up on the deck to ship oil, liquefied gas, etc..
3. according to the material points
Steel barge, wooden barge, cement barge. According to the ship, mainly general barge and barge.
General barge pendulous cut was streamlined, with anchor and rudder. The barge are in box (full barge), or one end and the other end is tapered box (semi integrated barge). China of ancient vessel (also known as the two ships) can be regarded as the prototype of the modern semi integrated barge fleet consisting of. It consists of two sections of the same length of the ship, the anterior bow end inclined cut, and the tail end is a square box, after the bow end is of a square box shape, and the tail end of the oblique cut, two ship box end mutual of rope, cable connection. Rudder is located in the rear section of the ship. Modern segmented barge generally do not set the rudder, the barge set anchor, China and some countries in Western Europe segmented barge set anchor. Integrated barge has the advantages of simple structure, convenient construction, low cost and with articulated barge fleet composition, reduce the sailing resistance and improve the carrying capacity, so the barge has been widely used. The United States has 3 kinds of commonly used barge, load and their scale is based on the standard to determine the scale of inland waterway. There are also a lot of barge built according to standard scale in inland waters of our country.
Hot Sale Good Quality Auto Metal Coil Slitting Line Machine
Hot sale good quality auto metal coil slitting line machine
                                                    Slitting effect of slitting line machine
 Â