hydraulic block valve 100L/min
Max. Flow: 100L/min
Pressure: 310Bar
GKV100 series
GKV100 proportional valve is a stackable valve with interchangeable control styles.
Electro-Hydraulic pilot valves can be either 12 VDC or 24 VDC,corresponding current is 0-1.5 or 0-0.75Amp.
This series can provide following functions:
- Inlet module with pilot supply.
- Inlet module without pilot supply.
- A/B Port with overload valve on main section
- A Port with overload valve on main section
- B Port with overload valve on main section
- A/B Port with P.O. check
- A Port with P.O. check
- B Port with P.O. check
- End Cap with oil return function
- End Cap without oil return function
We can also choose other cartridges according to your requirement.
Valve Block,Standard Valve Block,Alloy Valve Block,Hydraulic Valve Block Hangzhou Hanray Industry Co., Ltd , https://www.airsuspensionride.com
Â
Item
OEM Non-Standard Custom Black Flat Head Tubular Semi Hollow Pop Rivet Flat Head
Standards
DIN, ANSI, JIS, BSW, ISO and GB
Raw materials
1. Â Carbon steel: C1006, C1008, C1010, C1016A, C1018A, C1022, C1035K and C1045K
2. Iron: 1213, 12L14 and 1215 3. Stainless steel: SS201, SS202, SS302, SS303, SS304, SS316, SS410, SS420 and SS430 4. Alloy steel: SCM435, 10B21 and 40Cr 5. Brass or brass alloy: H63 (CuZn37, C2720), H65 (CuZn35,C2700), H68 (CuZn33), H70 (CuZn30, C2600), H90 (CuZn10 and C2200) 6. Bronze: C51000, C52100 and C54400 7. Aluminum or aluminum alloy: Al6061 and Al6063 8. Titanium and titanium alloy: TAD, TA1-TA8, TB2 and TC1-TC10 9. Silver and silver alloy: AgCu3, AgCu7.5, AgSn3^5, AgPb0.4^0.7, AgPd3^5 and AgNi10
Surface finish Â
1. Zinc plated, nickel-plated, brass-plated
2. Tin-, black-, copper-plated 3. Hot-working, make hardness up to 6.8/8.8, 9.8, 10.9, 12.9 grades
Size
M0.8-M16 and we also produce according to customer's requirements
Heat treatment
Material modification and carburized
 Manufacturing process
Wire drawing, cold heading, threading, heat treatment, surface plating, packing
Sample availability
Samples are available
Port
Shenzhen, China
Packing
Carton packing with the inner sealed polybag pack and stripe pack on the surface or pallet packing
Minimum order quantityÂ
 We accept test orders of small quantity
Price terms
  FOB, CIF, CFR, EXW
Trade terms
 Payment terms T/T, L/C, Western Union, PayPal
Lead-time
 10-35 days, according to customer's order quantity and detailed requirements
Performances
 1. Sharp teeth dig into surfaces to resist vibration and keep screws tight
Certifications
ISO standard and we can provide SGS report, material quality report, plating certification and finished inspection report
After-sales service
We will follow up the request strictly for customer's and will help customers solve problems after saleÂ
 Notice
For customized products, let us know the size, quantity, grade, finish
Product Category:
The main products which we produced: special long bolt (0-2000MM),
endless long bolt, motor bolt, battery pole column, extended battery
cover screw, fastener, bicycle lengthen screws, tooth plate screw, sports
equipment screw, baby door adjusting screw, car safety seat screw, Round
heart nail, step screw, stainless steel screw, non-standard special-shaped
screw, screw nut, pin roll, stamping parts, auto lathe parts. Besides, we
have the ability to do the different surface treatment per customer's
requirements including plating, e-coating, galvanizing, passivation ......
Company Introduction:
Dongguan Wanjin Hardware Products Co., Ltd. Is located in Qingxi
Town, Dongguan City, Guangdong Province, China. This impressive
3000 square meter facility specializes in producing a variety of standard,
non-standard screws, bolts, nuts and CNC lathe parts for over 11 years.
We can provide many kinds of OEM and design service; we have the
complete foreign trade service team & can offer the 24 hours online
service. As so far, our customers are mainly located in South America,
Europe, Middle East, and Southeast Asia. But, we are dedicated in
expanding our market so that we have the more opportunities to service
the more customers in the world as much as we can. 
FAQ:
Â
Q1:Are you a manufacture or trading company? A: We are a professional hardware manufacturer.But, we have the right to do the import & export business.           Actually, we have this experience for many years. Q2:What kind of products do you produce? A: We specializes in producing a variety of standard, non-standard screws, bolts, nuts and CNC lathe parts Q3:What kind of material do you usually use? A:We using carbon steels(low and medium carbon, alloy steels),stainless steel and brass. Q4:Do you support customized products? A:Sure, we can produce the customized products per your drawings and other requirements. Q5:Can we print out own logo? A:Yes, we can make it according to your request. Q6:Can you provide samples? A:For our regular products, we offer free samples.                                                                                                                                                                             For customized bolts, tooling and proofing charges need. All free samples not including its courier charge. Q7:How to ensure that every process's quality? A: We implement strict ISO quality control, and have 8 steps checking in production .                          We have our in-house QC daily and hire third party for randomly inspection. Q8:What is the lead time of the product? A:Generally 30-50 days after the deposit. Q9:How about the trading term and payment term? A:We can discuss this individually. Q10:Do you have after service? A:Certainly, you can contact us at any time.
Â
Description About Our Products:
Â
Item
OEM Non-Standard Custom Black Flat Head Tubular Semi Hollow Pop Rivet Flat Head
Standards
DIN, ANSI, JIS, BSW, ISO and GB
Raw materials
1. Â Carbon steel: C1006, C1008, C1010, C1016A, C1018A, C1022, C1035K and C1045K
2. Iron: 1213, 12L14 and 1215 3. Stainless steel: SS201, SS202, SS302, SS303, SS304, SS316, SS410, SS420 and SS430 4. Alloy steel: SCM435, 10B21 and 40Cr 5. Brass or brass alloy: H63 (CuZn37, C2720), H65 (CuZn35,C2700), H68 (CuZn33), H70 (CuZn30, C2600), H90 (CuZn10 and C2200) 6. Bronze: C51000, C52100 and C54400 7. Aluminum or aluminum alloy: Al6061 and Al6063 8. Titanium and titanium alloy: TAD, TA1-TA8, TB2 and TC1-TC10 9. Silver and silver alloy: AgCu3, AgCu7.5, AgSn3^5, AgPb0.4^0.7, AgPd3^5 and AgNi10
Surface finish Â
1. Zinc plated, nickel-plated, brass-plated
2. Tin-, black-, copper-plated 3. Hot-working, make hardness up to 6.8/8.8, 9.8, 10.9, 12.9 grades
Size
M0.8-M16 and we also produce according to customer's requirements
Heat treatment
Material modification and carburized
 Manufacturing process
Wire drawing, cold heading, threading, heat treatment, surface plating, packing
Sample availability
Samples are available
Port
Shenzhen, China
Packing
Carton packing with the inner sealed polybag pack and stripe pack on the surface or pallet packing
Minimum order quantityÂ
 We accept test orders of small quantity
Price terms
  FOB, CIF, CFR, EXW
Trade terms
 Payment terms T/T, L/C, Western Union, PayPal
Lead-time
 10-35 days, according to customer's order quantity and detailed requirements
Performances
 1. Sharp teeth dig into surfaces to resist vibration and keep screws tight
Certifications
ISO standard and we can provide SGS report, material quality report, plating certification and finished inspection report
After-sales service
We will follow up the request strictly for customer's and will help customers solve problems after saleÂ
 Notice
For customized products, let us know the size, quantity, grade, finish
Product Category:
The main products which we produced: special long bolt (0-2000MM),
endless long bolt, motor bolt, battery pole column, extended battery
cover screw, fastener, bicycle lengthen screws, tooth plate screw, sports
equipment screw, baby door adjusting screw, car safety seat screw, Round
heart nail, step screw, stainless steel screw, non-standard special-shaped
screw, screw nut, pin roll, stamping parts, auto lathe parts. Besides, we
have the ability to do the different surface treatment per customer's
requirements including plating, e-coating, galvanizing, passivation ......
Company Introduction:
Dongguan Wanjin Hardware Products Co., Ltd. Is located in Qingxi
Town, Dongguan City, Guangdong Province, China. This impressive
3000 square meter facility specializes in producing a variety of standard,
non-standard screws, bolts, nuts and CNC lathe parts for over 11 years.
We can provide many kinds of OEM and design service; we have the
complete foreign trade service team & can offer the 24 hours online
service. As so far, our customers are mainly located in South America,
Europe, Middle East, and Southeast Asia. But, we are dedicated in
expanding our market so that we have the more opportunities to service
the more customers in the world as much as we can.
FAQ:
Â
Q1:Are you a manufacture or trading company? A: We are a professional hardware manufacturer.But, we have the right to do the import & export business.           Actually, we have this experience for many years. Q2:What kind of products do you produce? A: We specializes in producing a variety of standard, non-standard screws, bolts, nuts and CNC lathe parts Q3:What kind of material do you usually use? A:We using carbon steels(low and medium carbon, alloy steels),stainless steel and brass. Q4:Do you support customized products? A:Sure, we can produce the customized products per your drawings and other requirements. Q5:Can we print out own logo? A:Yes, we can make it according to your request. Q6:Can you provide samples? A:For our regular products, we offer free samples.                                                                                                                                                                             For customized bolts, tooling and proofing charges need. All free samples not including its courier charge. Q7:How to ensure that every process's quality? A: We implement strict ISO quality control, and have 8 steps checking in production .                          We have our in-house QC daily and hire third party for randomly inspection. Q8:What is the lead time of the product? A:Generally 30-50 days after the deposit. Q9:How about the trading term and payment term? A:We can discuss this individually. Q10:Do you have after service? A:Certainly, you can contact us at any time.
Â
OEM Non-Standard Metal Black Hollow Solid Thread Hex Flat Head Rivet
Model NO.: Rivet
Standard: Per Customer′s Requirements
Application: Auto Parts, Furniture Parts
Market: Global
Trading Method: Fob, EXW or Can Be Discussed
Delivery Method: by Air, Sea or Express
Trademark: ODM
Transport Package: Plastic Bag +Carton Box + Wood Pallet
Specification: Customized
Origin: China
HS Code: 7318150000
Model NO.: Rivet
Standard: Per Customer′s Requirements
Application: Auto Parts, Furniture Parts
Market: Global
Trading Method: Fob, EXW or Can Be Discussed
Delivery Method: by Air, Sea or Express
Trademark: ODM
Transport Package: Plastic Bag +Carton Box + Wood Pallet
Specification: Customized
Origin: China
HS Code: 7318150000
Description About Our Products: