Construction Machinery includes excavator,
Wheel Loader , bulldozer, road roller and truck cranes.
It mainly using in construction, such as digging,
earthmoving, loading and unloading.
The wheel loader from 2 ton to 8 ton, 3 ton
and 5 Ton is most popular.
Bulldozer range from 80Hp to 420 Hp, 220 hp
SD22 and 230 Hp SD23 is the most popular model.
Road roller have signal drum and double
drum, also have tire road roller, the capacity ranges from 18 ton to 30 ton,
SR20M is the most popular.
Truck mounted crane range from 3 ton to 20
Ton mini crane, lifting height from 15 meter to 38 meter. 8 ton, 10 ton crane
truck are hot sale.
Forklift have 2 ton to 25 ton, both diesel
forklift and Electric Forklift. 3 Ton Diesel Forklift and 5 Ton Diesel Forklift
is most popular.
Crawler Excavator ranges from 0.8 ton to 46
ton, 0.8 ton, 1.2 ton, 1.5 ton, 1.8 Ton, 3.5 ton, 5 ton, 6 ton, 13 ton, 15 ton,
20 ton, 21 ton, 22 ton, 30 ton, 33 ton, 38 ton, 40 ton, 46 ton.
Shantui products including Diesel Forklift , electric forklift, heavy duty
forklift, Gasoline Forklift , container forklift, Side Loader , Pallet Truck ,
construction machinery including shantui bulldozer, wheel loader, crawler
excavator, road roller, generator set, motor grader, truck crane, construction
machinery parts, Shantui Parts , Cummins engine parts, komatsu parts, and other
machinery parts.
Construction Machinery Construction Machinery,Crawlwer Excavator,Road Tyre Roller,Shantui Excavator SHANDONG VOLIN HEAVY MACHINERY CO.,LTD. , https://www.shantuimachinery.com
If the user needs to bring the display of the watch indoors, an integrated turbine flow meter can be used to direct the output signal through the cable to the flow totalizer installed in the room. The turbine flow meter can display the instantaneous flow and cumulative flow of biogas.
Gas Turbine Flowmeter When measuring the biogas installation flowmeter, if there is a valve near the upstream of the installation point, the valve will be continuously opened and closed, which will have a great impact on the service life of the sensor. It is very easy to cause permanent damage to the sensor and the sensor Avoid installation on very long pipelines that are overhead. After a long time, it is very easy to cause leakage of the seal between the sensor and the flange due to the sagging of the sensor. If it is necessary to install, the pipeline must be installed at the upstream and downstream 2D ​​of the sensor. Fasten the device.
Turbine flowmeter in a certain flow range vortex separation frequency is proportional to the average flow velocity in the pipeline, after the vortex generating body into the capacitive probe or piezoelectric probe (detector) and configure the corresponding circuit, which constitutes the capacitive detection turbine flow Meter or piezo-detection turbine flow sensor.
Gas Turbine Flowmeter To ensure complete functionality, the flow pattern at the inlet should be undisturbed. The length of the upstream straight section should be approximately 15 times the diameter of the turbine flowmeter (D), and the length of the downstream straight section should be approximately 5 times the flowmeter diameter (D). By placing a non-streamline vortex sounder in the fluid, two rows of regular vortices are generated alternately from both sides of the vortex, this vortex being called a Karman turbine. 
Gas Turbine Flow Meter for Measuring Biogas Flow
Gas Turbine Flow Meters There are no power sources at most biogas sites. We can choose a battery-powered turbine flow meter. Generally, the flow rate of the biogas pipeline is small, and it is generally measured by reducing the diameter. In order to ensure complete functionality, the flow pattern at the entrance should be undisturbed.