The launch of new-type high pressure diesel portable screw air compressors with large displacement and high wind pressure, accurately and perfectly exert the best critical point of the impactors, therefore, customers are no longer worried about unstable flow and insufficient pressure in use. They are even able to support two sets of semi-hydraulic Drilling Rigs for stable use to meet the constant pursuit for efficiency in the market. Equipment operation status can be fully monitored, control panel in English and Chinese, the equipment running status most obvious. Non-normal automatic shutdown function is matched to ensure people and machines secure.
High Pressure Diesel Portable Air Compressor High Pressure Diesel Portable Air Compressor,Portable High Pressure Screw Compressor Quzhou Able Machinery Equipment CO., LTD. , https://www.ablejx.com
The following is just for example of our 9m spray booth.Â
Detailed Product Description
9M Emergency Stop Energy Saving Insulation EPS Industrial Heat Spray And Baking Booth, Room
Booth Dimension
- Internal Size(L×B×H)
9200x4500x3500mm
- External Size(L×B×H)
9344x6396x4100mm
Foundation and Floor
- Grid
2 rows air exhust plenum chamber
- Metal Basement
Need to build the base construction , 2 rows of pits in the ground for exhaust air, with galvanized grids made by twisted steel and flat bar above
Wall and Door
- Steel Wall
Double construction with insulations EPS , thickness 75mm, 0.5mm steel thickness ;
width:950mm, tongue and groove interlock structure,
with Polystyrene(EPS) insulation inside
- 3-Folded Entrance Door
 With Safety Glass Window1 Unit, 3500×3400 mm(WxH) , galvanized steel cover frame,
with polystyrene(EPS) insulation inside
- Operator's Door With
 Safety Glass Window1Unit, 650×2000 mm(W×H)
Lighting System
- Ceiling Lights
12Units, each 4×36 W, with electronic ballasts.
- Side Lights
12Units, each 2×30W, with electronic ballasts.
- Brightness
>1000LUX
Filter System
- Filter
31M2
Ventilation System
- Intake air system
 (Fresh Air)2x5.5KW double-intake centrifugal fans for intake air, model is YDW4.5M,
total air capacity is 30000m3/h
- Exhaust
 air system(Exhaust Air)1x7.5KW double-intake centrifugal fans for exhaust air, external motor, belt-drive, model TAE-710H, air capacity is 20000m3/h
- Damper actuates
Manual damper actuates from spraying to baking cycle, manual damper for exhaust air
Heating System
- Heating Exchange
Stainless Steel
- Heating
 Exchange Capacity260000Kcal/h
- Max. Drying
 Temperature 80 °C
- Heating time
10-15 min (from 20 to 60) by Drying Phase
- Heating Type (optional)
RIELLO RG5S (260000 kcal/h)Diesel )1set
Control Box
- Control system
Spraying, heat spraying, baking, time setting, lighting switch, failure indicator,
thermostat, power supply switch, emergency stop, ampere meter, voltmeter,
hour meter, temperature limit controller, pressure gauge, exhaust reduction
voltage motor start
- Total power
22KW
Basic Draw
Real Photo for our airplane booth
the same price higher quality, the same quality lower prices.
Â
*2 years quality warranty!!!
*Fast and stable supply ability!!!
*Personalized design to meet customer various needs!!!
Over 14 years big spray booth factory;
Powder coating technology treatment;
Factory price and best quality;
OEM available.
Â
The large/industrial spray booth is customized size according to need. When we receive your inquiry, we will give you designed draw firstly, after confirming draw, we will submit the detailed specifications. When everything is confirmed, we will produce according to the draw to avoid any mistake.Â
The following is just for example of our 9m spray booth.Â
Detailed Product Description
9M Emergency Stop Energy Saving Insulation EPS Industrial Heat Spray And Baking Booth, Room
Booth Dimension
- Internal Size(L×B×H)
9200x4500x3500mm
- External Size(L×B×H)
9344x6396x4100mm
Foundation and Floor
- Grid
2 rows air exhust plenum chamber
- Metal Basement
Need to build the base construction , 2 rows of pits in the ground for exhaust air, with galvanized grids made by twisted steel and flat bar above
Wall and Door
- Steel Wall
Double construction with insulations EPS , thickness 75mm, 0.5mm steel thickness ;
width:950mm, tongue and groove interlock structure,
with Polystyrene(EPS) insulation inside
- 3-Folded Entrance Door
 With Safety Glass Window1 Unit, 3500×3400 mm(WxH) , galvanized steel cover frame,
with polystyrene(EPS) insulation inside
- Operator's Door With
 Safety Glass Window1Unit, 650×2000 mm(W×H)
Lighting System
- Ceiling Lights
12Units, each 4×36 W, with electronic ballasts.
- Side Lights
12Units, each 2×30W, with electronic ballasts.
- Brightness
>1000LUX
Filter System
- Filter
31M2
Ventilation System
- Intake air system
 (Fresh Air)2x5.5KW double-intake centrifugal fans for intake air, model is YDW4.5M,
total air capacity is 30000m3/h
- Exhaust
 air system(Exhaust Air)1x7.5KW double-intake centrifugal fans for exhaust air, external motor, belt-drive, model TAE-710H, air capacity is 20000m3/h
- Damper actuates
Manual damper actuates from spraying to baking cycle, manual damper for exhaust air
Heating System
- Heating Exchange
Stainless Steel
- Heating
 Exchange Capacity260000Kcal/h
- Max. Drying
 Temperature 80 °C
- Heating time
10-15 min (from 20 to 60) by Drying Phase
- Heating Type (optional)
RIELLO RG5S (260000 kcal/h)Diesel )1set
Control Box
- Control system
Spraying, heat spraying, baking, time setting, lighting switch, failure indicator,
thermostat, power supply switch, emergency stop, ampere meter, voltmeter,
hour meter, temperature limit controller, pressure gauge, exhaust reduction
voltage motor start
- Total power
22KW
Basic Draw
Real Photo for our airplane booth
the same price higher quality, the same quality lower prices.
Â
*2 years quality warranty!!!
*Fast and stable supply ability!!!
*Personalized design to meet customer various needs!!!
Over 14 years big spray booth factory;
Powder coating technology treatment;
Factory price and best quality;
OEM available.
Â
Excellent and High Quality Spray Booth, Industrial Auto Painting Equipment
Model NO.: GW-I18
Heating Mode: Diesel
Paint Mist Treatment: Dry-type
Condition: New
Inside Size: 9200X4500X3500mm
Outside Size: 9344X6396X4100mm
Front Door(mm): 3000X1600(Wxh)
Intake Fan: 2X5.5kw Double-Intake Centrifugal Fans for Intake
Exhaust Fan: 1X7.5kw Double-Intake Centrifugal Fans for Exhaust
Heating System: Riello Rg5s (260000 Kcal/H)Diesel )1set
Trademark: Captain/OEM
Transport Package: Export Package
Specification: 9200x4500x3500mm
Origin: China, Shandong
HS Code: 8424899990
Model NO.: GW-I18
Heating Mode: Diesel
Paint Mist Treatment: Dry-type
Condition: New
Inside Size: 9200X4500X3500mm
Outside Size: 9344X6396X4100mm
Front Door(mm): 3000X1600(Wxh)
Intake Fan: 2X5.5kw Double-Intake Centrifugal Fans for Intake
Exhaust Fan: 1X7.5kw Double-Intake Centrifugal Fans for Exhaust
Heating System: Riello Rg5s (260000 Kcal/H)Diesel )1set
Trademark: Captain/OEM
Transport Package: Export Package
Specification: 9200x4500x3500mm
Origin: China, Shandong
HS Code: 8424899990
The large/industrial spray booth is customized size according to need. When we receive your inquiry, we will give you designed draw firstly, after confirming draw, we will submit the detailed specifications. When everything is confirmed, we will produce according to the draw to avoid any mistake.Â