Zowell 1 ton reach stacker is an industrial material
handling equipment, which refers to the forward moving wheel type vehicle which
carries out loading and unloading, stacking and short distance transportation
of the good by pallets. They are usually battery driven and used for transportation
of large goods. The electric reach stacker/truck combines the advantages of counterbalance
electric forklift and stacking truck, which has the characteristics of
environmental protection, energy saving, low noise, high lifting and working in
limited space.
Detail features of Zowell reach stackers:
1. Front moving function
2. The fork can tilt
forward and backward for easy loading and unloading of goods and material, thus
improving the transporting stability of the reach truck.
3. This reach truck
adopts an original multifunctional handle from Frei, Germany. The operation is
comfortable and the functional buttons can realize precise control.
4. Side loading and unloading of storage battery
5. Multipath valve stem control
6. The ZF driving unit is
imported from Germany. It adopts vertical installation. It also delivers
superior performance, stability, and reliability.
7. Emergency power-off
switch: the power can be rapidly cut off in emergencies to ensure safety.
8. Multifunctional meter
can display failure code, electric quantity and some other information. The
operators can know the running condition of the truck via the meter.
Electric Reach Stacker ,Walkie Reach Stacker,Mini Reach Stacker,Doosan Walkie Reach stacker Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com
The gantry can move forward 580cm which can reduce the turning radius of the
truck as well as ensure its running stability.
The side door of the truck and battery cover can be opened, then the battery
can be removed from the side door. So the changing and maintenance of the
storage battery is convenient. There are optional batteries such as FAMM, GS,
HOPPECKE, Trojan.
Different valve stem has different functions such as fork lifting/descending,
fork tilting forward/backward, gantry moving forward/backward. The distribution
of valve stem is compact. The operator can carry out operation with only one
finger, realizing precise control.
Electric valve repair guide
First, the three fine motorized valve does not work after power Check the power supply connection is not good → re-wiring and connector connection Check the power supply voltage is within the scope of work → → tune the normal position of the coil is not desoldering → re-welding coil short circuit → replace the coil Working pressure difference is not appropriate → adjust the pressure difference → or replace the appropriate electric valve fluid temperature is too high → replace the electrically-driven valve is equivalent to the impurities so that the main valve core and the moving core stuck → cleaning, seal damage Should replace the seal and install the filter Liquid viscosity is too high, the frequency is too high and life has been to → replace the product Second, the electric valve can not close the main spool or iron core seal has been damaged → Change the seal fluid temperature, viscosity is too High → replace the electric valve counterparts have impurities into the valve to produce electric valve or moving core → cleaning spring has reached or deformed life → replace the orifice balance hole blocked → promptly clean the working frequency is too high or life has been to → re-election of products Or update the product Third, the other leaks → Check the seal is damaged, the spring assembly is not good External leakage → Loose connections or seals have been → screws or fasteners replace the head of the noise → loosening the seal is energized, tighten. Voltage fluctuation is not within the allowable range, adjust the voltage. Core suction surface impurities or uneven, timely cleaning or replacement. This article Keywords: electric valve