Electric Vehicle Compressor Terminal sc-4-GY     Product parameters Our company is focus on professional design and produce for the glass t o metal seal products, it is used the most advanced CO atmosphere sintering furnace in the world, the production range is related to all of the high or low temperature glass to metal seal products, the application range is from low current sensor 20amp to 900amp power connector, and the company also have enough technology level to design and produce according to the customer requirements. The company passed ISO9001, RoHS and UL certificate, it will ensure that the product a reliable sealing, insulation, resistance and mechanical pressure. At present, the company products are mainly used for the air conditioner, refrigerator compressor, new energy vehicle air compressor, commercial screw compressor of the air conditioner, sensor, Lithium battery cover, and LED bracket, it is widely used in commercial, aviation, aerospace, millitare and other fileds.
The
metal profile produced by Roll Forming Machine look beautiful, elegant and
noble. They are widely used for garden, factory, hotel, exhibition center and
villa, etc.
Cold Roll Forming Machine Components:
Roll forming machine consists of Uncoiler,
Coil sheet guiding device, Main roll forming system, Post cutting device,
Hydraulic station, PLC control system and Support table.
Optional with Hydraulic Decoiler, Auto Stacker, Safe Cover, Pre-Cutting, Film Covering Device, and so on.
Cold Roll Forming Machine Working
Flow:
Decoiling→Feeding & Guiding→Flattening(If
needed)→Pre- Punching/Cutting(If needed)→Roll Forming→Post Step
pressing/Punching(If needed)→Post Cutting→Finished Products To Support Table
Parameter:
9.Motor:4+4kw
Cold Roll Forming Machine Cold Roll Forming Machine, Cold Forming Machine, Cold Rolling Machine Botou Xianfa Roll Forming Machine Factory , https://www.rollforming.nl
No
Item
Standard
1
Thickness
4.5±0.05 mm
Dimension
44.5 * 16.5 *4.5 mm
Pin
3.2 * 31.5 mm
2
Surface
Bright and clean,no glass crack
3
Insulation resistance
DC500V,500MΩ
Electrical strength
AC3000V,0.5mA,1s
Max current
35A
4
Work temperature
Subzero 35ºC-125ºC
5
Airtightness
4MPa,1min no leakage
Heat shock
  Temprature 265ºC,10S,no leakage after 4MPa
Weld strength
Torque force no less than 30kgf.cm
6
     Surfacing
       Chemical nickel2-4um Â
Company Profile
WORKSHOP/TEST
Â
1.Suitable to process:Colored Steel plate, galvanized board
2.Width of the plate:1000/1200/1250mm
3.Roller stations:10-19rows
4.Rolling material: Forging Steel 45#
5.Rolling galvanization thickness:0.05 mm
6.Material of the cutting blade :Cr12
7.Hydraulic oil :40#
8.Dimensions: 9000mm*1700mm*1600mm
10.Thickness of the plate:0.3-0.6mm
11.Productivity:8-10m/min
12.Diameter of the roller:70mm
13.Weight:About 4.6 T
14.Voltage:380V 50Hz
15.Processing precision : within 1.00mm
16.Transportation:one complete machine need one 40feet container
to hold
17.Payment term:30%deposit,and balance before delivery
18.Standard components: Chain 1 pcs, Hydraulic oil pipes: 2 pcs,
electromagnetism valves 1 pcs. limit switch:2 pcs
19.This machine is composed of feeding table,forming machine, pressing
device,cutting device, hydraulic system,computer control system,discharge table.
Optional devices have
manual uncoiler,hydraulic uncoiler,auto stacker and so on.
3-Way Terminal Block Stainless Steel Pin Connector for AC Car
Model NO.: SC-4-GY
Trademark: unicarer
Origin: Guangdong