Air Filter paper
Glass Fiber Pleated Filter Cartridge Water Purification Equipment,Glass Fiber Pleated Filter Cartridge,Glass Fiber Cartridge,Glass Fiber Membrane Filters Ji'an city Qing Feng Filter Equipment Material CO.,Ltd , https://www.qingfengfilter2.com
1.1 Summary:
This equipment is specially used for producingΦ 13-Φ 50.8mm(1/2'' 2''), δ 0.6-2.0mm high-frequency straight seam welded pipe and corresponding square pipe and special-shaped pipe(δ ≤ 1.5mm). The composition of equipment is from uncoiler to fixed length cutting saw. Rolling speed can be adjusted correspondingly within suitable range of pipe diameter and wall thickness.
1.2 Applicable material:
(1)Hot or cold-rolled steel strip (As per GB700-88 or GB1591-88)
(2)Material: Low-carbon steel, low alloy steelδ S≤ 345Mpa, δ B≤ 610Mpa
(3)The thickness of steel strip: 0.6-2.0mm (As per GB708-88)
(4)The width of steel strip: 40-160mm
(5)I. D. Of steel coil: Φ 450-Φ 550mm
(6)O. D. Of steel coil: Φ 800-Φ 1200mm
(7)Maximum weight coil: 1000kgs
1.3 Dimension range of processing steel pipe:
(1)O. D.: Φ 13-Φ 50.8mm(1/2'' 2'')
(2)Wall thickness: 0.6-2.0mm (square pipe and special-shaped pipeδ ≤ 1.5mm)
(3)Length: 4-8M
1.3 Milling speed: 20-90M/min
Work Flow:
Uncoiling -- shearing and butt welding -- material accumulating -- flattening forming system -- high frequency induction welding machine -- inside and outside burr removing frame -- water cooling system -- sizing system -- leveling system -- speed testing -- Turkish frame -- saw cutting -- running out table
Main components:
1 Uncoiler
2 Accumulator
3 Shearing and butt welding machine
4 Forming machine
5 Roller System of Forming
6 Seam Guide
7 High Frequency Induction Welding Machine
8 Roller System for Moving
9 Burr Removing Frame(Inside and outside)
10 Water cooling system
11 Sizing machine
12 Roller System of Leveling
13 Speed Testing Wheel
14 Turkish Frame
15 Auto flying saw controlled by Computer
16 Run-out table
17 Electric control Equipment
18High frequency welding machine
Pipe mill specs
Machine
 Model Pipe Diameter
 Pipe Size
 Thickness
 Speed
 Main
 Power Welding
 Power
WG-16
Φ0.3~ Φ1.0inch
(Φ8mm~Φ25mm)7×7mm
20×20mm0.3 ~ 1.2mm
100m/Min
22Kw
60Kw
WG-25
Φ0.3~ Φ1.2inch
(Φ8mm~Φ32mm)7×7mm
25×25mm0.3 ~ 1.5mm
90m/Min
37Kw
100Kw
WG-28
Φ0.5~ Φ2.0inch
(Φ13mm~Φ50mm)10×10mm 40×40mm
0.5 ~ 1.8mm
90m/Min
75Kw
100Kw
WG-32
Φ0.5~ Φ2.5inch
(Φ13mm~Φ63.5mm)10×10mm 50×50mm
0.5 ~ 1.8mm
90m/Min
110Kw
150Kw
WG-50
Φ0.8~ Φ3.0inch
(Φ20mm~Φ76mm)16×16mm 60×60mm
0.7 ~ 3.0mm
80m/Min
132Kw
200Kw
WG-60
Φ1.2~ Φ4.0inch
(Φ32mm~Φ102mm)25×25mm
80×80mm1.0~ 3.5mm
70m/Min
160Kw
200Kw
WG-76
Φ1.0~ Φ5.0inch
(Φ25mm~Φ127mm)20×20mm
100×100mm1.0~ 3.5mm
70m/Min
185Kw
200Kw
WG114
Φ1.6~ Φ5.0inch
(Φ40mm~Φ130mm)35×35mm
100×100mm1.5~ 5.0mm
60m/Min
160Kwx2
400Kw
WG155
Φ2.0~ Φ6.0inch
(Φ50mm~Φ155mm)40×40mm
120×120mm1.5~ 5.0mm
60m/Min
160Kwx2
400Kw
WG165
Φ2.0~ Φ7.6inch
(Φ50mm~Φ195mm)40×40mm
150×150mm2.0~ 6.0mm
45m/Min
200Kwx2
500Kw
WG219
Φ3.5~ Φ8.60nch
(Φ89mm~Φ219mm)70×70mm
170×170mm4.0~ 8.0mm
40m/Min
200Kwx2
600Kw
WG273
Φ4.0~ Φ10.7nch
(Φ100mm~Φ273mm)80×80mm
215×215mm4.0~ 12mm
25m/Min
320Kwx2
800Kw
Cost-effective and long service life
Reliable retention of particulates
Featurea and benefits
Superior dirt-holding capacity
High flow rates at low pressure drop
Cost-effective and long service life
Reliable retention of particulates
Quality
Cartridge Filter produced in a controlled environment
Manufactured according to ISO 9001 certified quality management system
Application
Pre-filtration before terminal gas filtration
Classification and Pre-filtration for viscous and colloidal liquids
Classification for wine and other viscous drinks
Materials of Construction
Filter Media
Glass Fiber
Support and Drainage
PP
Core, Cage
PP
End Caps
PP
O-rings/Gasket
Silicone/EPDM/Viton
Sealing Technology
Thermal Bonding, No Adhesives
Dimensions
Diameter
Φ68
Length
5 inch, 10 inch, 20 inch, 30 inch, 40 inch
Filtration Area, ft 2
≥ 4.0 per 10-inch element
Pore Size, μm
0.65, 1.0, 3.0, 5.0
Maximum Differential Pressure
Forward: 4.2 bar @ 23 C; 1.5 bar @ 85 C
Flow Rate & Pressure Drop , per 10-inch cartridge
0.65 μm
≥ 28 L/min at 210 mbar
Particle Removal Efficiency (%)
≥ 90
Sanitization
May be hot water sanitized for 30 cycles using purified water at 85 C for 30 min
Straight Seam Pipe Making Machine with High Frequency Welding
Model NO.: 28, 32, 50, 60, 76, 90, etc
Cutter: Computerized Controlled Saw Cutter
Cooling: Water Tank
Shipment: in Hq Containers
Warranty: One Year
Trademark: Haoshuo
Transport Package: Seaworthy Packing
Specification: CE, ISO
Origin: Jiangsu, China
HS Code: 85152110
High Frequency Wedling Pipe Making Machine for Steel Pipe Production