Insulation related problems in the use of loadometer load cells

Weighing sensor on the loadometer will produce poor insulation during production and use
First, when the patch is mounted, the surface of the elastomer patch is not thoroughly cleaned, and residual sand, iron particles, etc. result in abnormal resistance. As a result, the sensor has a large zero point after installation, broken bridges, and insufficient insulation.
Second, when patching the elastic patch residual cotton yarn, debris, etc. may also cause poor sensor insulation, zero drift.
Third, the sensor solder joints must be cleaned up, otherwise the residual flux corrosion solder joints, but also easy to cause poor insulation.
Fourth, wire welding equipment is not reasonable
Poor sensor insulation is prone to the following conditions:
First, the display indicates that the value is unstable, and the digit jumps when the finger touches the sensor.
Second, the display indicates that the value is not stable. The instrument does not reflect when the finger touches the sensor.
Third, zero drift, data chaos and so on.

Weighbridge manufacturers remind you that the sensor is the core component of the weighbridge, and most of the anomalies are on it. When your floor scale or weighing equipment is abnormal, you must seek professional service.

Popcorn Making Machine

Popcorn Making Machine,Chocolate Popcorn Machine,Health Popcorn Machine,Sweet Snacks Popcorn Making Machine

Jinan RuiHan Trading Company Limited , https://www.ruihangroup.com