Hand Brush Filter Features

Brush filter structure and working principle Hand brush filter consists of bone nylon brush and stainless steel parts. The part passes through the filter cover. The brush device is installed inside the stainless steel filter. The filter cover is externally installed with a simple and convenient. Handle, just gently turn the handle, which can remove micro-coarse impurities from the filter through the sewage outlet discharge, brush flow during the flow is not interrupted, do not have to stop and remove the filter to clean the filter, shell for high-quality carbon steel cylinder.

Brush filter technical parameter design working pressure: ≤ 1.0Mpa.

Pressure loss: ≤0.015MPa

Working temperature: ≤90°C

Filtration accuracy: d=1.2mm.

Brush filter installation and use of manual brush filter can be installed horizontally or vertically, but it should be noted that the direction of the water flow should be consistent with the direction of the housing arrow, vertical flow direction is from top to bottom.

When the pressure difference between the inlet and outlet reaches 0.04MPa, the sewage valve needs to be opened, and the handle is gently swept to scrub the filter net until the discharge water quality of the sewage outlet becomes clear. The entire scrubbing process system can be normally operated without downtime.