China's LED packaging manufacturers go out to meet Taiwan and South Korea constraints


The LED industry is optimistic next year. Many Taiwanese companies are worried that mainland manufacturers will be strongly supported by the government and will replace Taiwanese manufacturers, especially the midstream packaging factories with lower technology thresholds. However, mainland manufacturers still have not left the Chinese market, and the mainland LED packaging factory only supplies Chinese domestic lighting. International lighting companies that focus on quality, as well as demanding higher TV backlights, prefer Taiwanese and Korean products.
The LED packaging industry is strong and weak. The LED upstream epitaxial plant has been consolidated in the past two years, and this year, Sanan has reached its peak. Was asked if this consolidation trend extends down to the midstream packaging factory? Ye Weifu, chairman of Everlight, said that 2014 will not appear. He analyzed, mainly because the existing manufacturers are strong, weak and weak, and they are unable to play a comprehensive effect; and the investment threshold of the packaging factory is low, unlike the capital intensive of the epi-plating factory, so small The manufacturer will continue to exist next year and will be eliminated after waiting for a period of loss.
In addition, the technical threshold of packaging is also low. In recent years, mainland China has frequently digged talents. The industry is worried that Taiwanese factories will soon be replaced by the mainland.
Ye Qifu is optimistic that the entire LED industry must be competitive, it is the cooperation between upstream and downstream, not just the package segment is strong. He pointed out that there are many upstream epitaxial factories in the mainland, but there are not many strong ones. Although the mainland packaging factories have a rising trend, the current orders are limited to Chinese lighting brands, and international lighting manufacturers are still placing orders.
Even mainland TV brands such as Haier, Konka, Chuangwei, etc. use more LEDs in Taiwan and South Korea, mainly because of the higher level of backlight technology.
Taiwan’s out of differentiation, Chairman of the Board of Directors, Jian Feng, also said that Taiwan’s products have technological advantages and can make differentiated products. For example, there are three major products in the next round, which can make a clear difference with the mainland epitaxial wafer factory, including flip chip packaging, high voltage LED, and package-free chips. These new technologies have significant cost savings and high gross margins because they do not require wire and leadframes or can replace the entire power supply with a single driver IC.

According to the structure, it is mainly divided into four columns, single column (C type), horizontal, vertical frame, universal hydraulic press and so on.

According to the application, it is mainly divided into metal forming, bending, stretching, punching, powder (metal, non-metal) molding, press fitting, extrusion and the like.

Hot Forging Hydraulic Press

The large forging hydraulic press is a forging device capable of performing various free forging processes and is one of the most widely used equipment in the forging industry. At present, there are 800T, 1600T, 2000T, 2500T, 3150T, 4000T, 5000T and other series of forging hydraulic presses.

Four-column hydraulic press

The hydraulic press is suitable for the pressing process of plastic materials. Such as powder product molding, plastic product molding, cold (hot) extrusion metal forming, sheet stretching and cross-pressure, bending, turning, correction and other processes.

The four-column hydraulic press can be divided into four-column two-beam hydraulic press, four-column three-beam hydraulic press, and four-column four-beam hydraulic press.

Single arm hydraulic press (single column hydraulic press)

Expandable working range, use three-sided space, lengthen hydraulic cylinder stroke (optional), maximum retractable 260mm-800mm, preset working pressure; hydraulic system heat sink.

Gantry hydraulic press

It can assemble, disassemble, straighten, calender, stretch, bend, punch and so on the machine parts, and truly realize the multi-purpose of one machine. The machine table can move up and down, the size expands the opening and closing height of the machine, and the use is more convenient.

Double column hydraulic press

This series of products are suitable for press fitting, bending and shaping, stamping and indentation, flanging, punching and shallow drawing of small parts; forming process of metal powder products. It adopts electric control, with jog and semi-automatic circulation, which can maintain pressure delay, and has good slider guiding, easy to operate, easy to maintain, economical and durable. According to the needs of users, it can add functions such as thermal instrument, ejection cylinder, stroke digital display and counting.

Press Fit Machine

Press Fit Machine,Press Fit Machine 2 Ton,C Frame Forging Press,Semi-automatic Press Fit Machine

CHENGDU ZHENGXI HYDRAULIC EQUIPMENT MANUFACTURING CO., LTD. , http://www.zxhydraulic.com