2000GPH Sea Water Transfer Submersible Centrifugal Pump
VOCs Catalytic Combustion System consists of four(or three) activated carbon adsorption tanks and a catalytic combustion chamber. The exhaust gas in the production line is collected and sent to the gas collection box, and then the exhaust gas is sent to the filter to filter out the dust in the exhaust gas, thereby preventing the activated carbon micropores from being blocked. The filtered exhaust gas enters the adsorption chamber, and the activated carbon adsorbs the VOCs in the exhaust gas. When the activated carbon adsorber is close to saturation, the saturated activated carbon adsorber is desorbed and desorbed by the hot gas flow, and the organic matter is desorbed from the activated carbon. During the desorption process, the organic waste gas has been concentrated, and the concentration is increased by several tens of times to more than 2000 mg/m3. The concentrated exhaust gas is sent to the catalytic combustion device, and finally decomposed into CO 2 and H 2 O and discharged. After the analytical desorption is completed, the activated carbon adsorber enters the standby state. When the other activated carbon adsorbers are close to saturation, the system automatically switches back, and the saturated activated carbon adsorber is analytically desorbed, so that the cycle works. The finally cleaned clean gas is discharged into the atmosphere by the main exhaust fan
Voc Treatment System,Voc Treatment Equipment,Vocs Catalytic Combustion,Voc Gas Treatment Equipment Botou Ever Lucky Environmental Protection Machinery Co., LTD , https://www.dustcontrolling.com
Â
Product Description
1. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
2. Totally submersible and ignition protected.
3. To all existing safety standards.
4. Water cooled motors for long life, with anti airlock design and moisture tight seals.
5. Snap-lock strainer base for easy installation and removal, and silent vibration free running
6. Includes comprehensive user manual with installation instructions and wiring diagram Â
Application
Typically used in boat hulls / bilges
Bait tanks
Ponds, pools, spas
Other applications where you have to remove water from
Note: These pumps are designed for intermittent use only, NOT designed for continuous use
How a Bilge Pump WorksÂ
Non-automatic bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply.
Backed SEAFLO's 1-Year Warranty!
Model
Flow rate
Volts
Current
Head
Wire lead
Outlet Dia
N.W/G.W
SFBP1-G1500-01
1500 GPH
12V
7.0A
5 m
1 m
29 mm/1-1/8"
1.13/1.21 kg
SFBP2-G1500-01
1500 GPH
24V
5.0A
5 m
1 m
29 mm/1-1/8"
1.13/1.21 kg
SFBP1-G2000-01
2000 GPH
12V
9.0A
6 m
1 m
29 mm/1-1/8"
1.13/1.21 kg
SFBP2-G2000-01
2000 GPH
24V
5.5A
6 m
1 m
29 mm/1-1/8"
1.13/1.21 kg
SFBP1-G3000-01
3000 GPH
12V
12.0A
8 m
1 m
40 mm/1-1/2"
2.10/2.37 kg
SFBP2-G3000-01
3000 GPH
24V
7.0A
8 m
1 m
40 mm/1-1/2"
2.10/2.37 kg
SFBP1-G3500-01
3500 GPH
12V
13.0A
8 m
1 m
40 mm/1-1/2"
2.10/2.37 kg
SFBP2-G3500-01
3500 GPH
24V
8.0A
8 m
1 m
40 mm/1-1/2"
2.10/2.37 kg
100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.
Â
2. What about the delivery time?
It depends on your order quantity; it usually takes 15-25days upon receipt of your 30% deposit by T/T.
Sample can be delivered within 7days.
Â
3. Can I buy different types in one container?
Yes, you can mix different types in one container.
Â
4. Do you have oversea agents?
1. Of course. We have many agents overseas, such as Dacon Europe A/S in Denmark, A P Lifting Gear Company LTD in United Kingdom, SEAFLO MARINE & RV NORTH AMERICA, LLC in United States, Bin Alshaikh Abobaker for Treading in Yemen, Williams Industrial Products Pty Ltd/Marine Systems Australia and SEAFLO AUS pty in Australia, Azzi Sport Marine S.A.R.L in Lebanon, SARAY DENIZ MALZEMELERI YATCILIK SAN.TIC.LTD.STI in Turkey, RECAMBIOS MARINOS S.L in Spain, DINO CO.,LTD in South Korea.
2. Welcome oversea agents!
Â
5.Do you accept OEM/ODM
Yes. We are also the OEM supplier of many famous companies, such as WALMAT.
Â
6. What is your terms of payment.
T/T, 30% in advance, balance against B/L copy.
Â
7. What is your warranty?
5 years, and within 24 hours reply will be provided to solve customers' problems.
Â
8. What is your port of loading?
Fuzhou Port.
2000gph Sea Water Transfer Submersible Centrifugal Pump
Model NO.: SFBP1-G2000-01
Protection: Anti-Airlock, Ignition Protected
Motor: Water Cooled Motors to Extended Life
Pump Body: Thermoplastic
Housing: Tough ABC Housing
Factory: Tough ABC Housing
Duty Cycle: Intermittent
Type: Inland and Coastal Boats
Material: Thermoplastic
Trademark: SEAFLO
Transport Package: 1PC/Inner Box; 20PCS/CTN; Seaworthy Strong Cartons
Specification: CE
Origin: Fujian, China
HS Code: 8413709190
2000Â GPH